Assignment 5

For the fifth assignment for BENV2426 i wanted to create and model a natural system.  Initially i wanted to create the natural system of a tree.  However, due to the accessibility and availability of 3d printing I decided not to model a tree system for the fifth assignment.

Researching at a smaller scale i decided to then look at different leaf types.

Taking inspiration for different leafs, I really liked the form and shape of a Maple leaf.

After doing some research of Maple leafs i decided that this was the natural system i was going to recreate and laser cut for my final assignment.

The image below was found on the 'Grasshopper3D' website.
I intend to recreate the below image.

______________________________________________________________________________

Due to the sizing limits of the laser cutter i had to split my model into two halves.
below are some images of the forms progression and overall view of the script, the final script will be shown at a smaller scale.

Production of Assignment 5

Assignment five has definitely been the most enjoyably assignment for me.  From scripting the whole assignment from scratch in grasshopper i have learned a great deal about grasshopper, its potential.  However, i have also gained a great insight into parametric design and the fabrication aspect and process.

Below is an image of one of the final leafs

Below is the script for the leaf shape and veins

Below is the script for the leaf pattern

Assignment Four

Brief: Design and produce a 3D model consisting of minimum 2 separate parts. The parts can be constructed using one or two combination manufacturing process (e.g. lasercut parts and 3D printed parts).  The model must occupy a bounding box with dimensions: 204mm x 226mm x 200mm

___________________________________________

For the fourth assignment for experimental modelling, I wanted to create a 3D geometry that was interchangeable and could be assembled and recreated into different forms.

The main idea around creating square like shapes that can be assembled into differing forms was derived from the idea of an architectural wall that can be changed and transformed before, during and after instillation.  The main idea centred on clients having the ability to change wall patternations and designs.

The idea also applies to furniture and design ornaments.  The user has the ability to change and personalise their furniture and ornaments.

In order to achieve this is decided to create forms like the ones below.  It was important that the base shape was a tessellating pattern to allow for a more ability in creating many different forms.  Below are some images of what I wish to achieve.

I will be laser cutting the shapes to maximise the potential for etching patterns and symbols.